Neo

A Highly Efficient Gas-to-liquid Injection Technology

Moleaer’s Neo is an economical and highly effective tool that improves water quality in many applications including agriculture, food handling and safety, aquaculture, and more. In horticulture, the Neo suppresses root disease and promotes the growth of healthy, resilient plants. Negatively charged, neutrally buoyant nanobubbles remain suspended in water for long periods of time, acting like an oxygen battery that delivers oxygen to the entire body of water. As oxygen is consumed, the nanobubbles continue to diffuse more oxygen into solution to maintain optimal levels of DO. The nanobubbles produce a natural oxidant capable of reducing biofilm growth* and suppressing harmful pathogens, even in warm water.

Versatile Applications

The versatile Neo and Neo2 cost effectively and efficiently improves water quality in many applications.



Horticulture

  • Deep Water Culture
  • Shallow Water Culture
  • Nutrient Film Technique (NFT)
  • Drip Irrigation
  • Water Tank Oxygenation
  • Reservoir Oxygenation
  • Algae Control
  • Reduce chemical use or improve chemical performance
  • Biofilm Control*

Food Safety & Handling

  • Reduce chemical cost or improve chemical performance
  • Reduce food spoilage and risk of food borne illness
  • Remove or reduce Listeria from surfaces
  • Clean-in-Place (CIP) - food handling surfaces
  • Wet Packing
  • Biofilm Control*

Aquaculture

  • High PPO2 values transfer more O2 to fish
  • Hatchery Tank Oxygenation
  • Net Pen Oxygenation
  • Seabed Remediation
  • Algae Prevention
  • Sea Lice Prevention
  • Suppression of Harmful Bacteria & Fungus

* Organic, bio-based nutrients may impact biofilm accumulation rates.

Features & Benefits


  • <200 nm-sized bubbles produced in excess of 1 billion nanobubbles / mL
  • Improved water quality
  • Oxygenation of any tank and any depth of water
  • Enhanced nutrient absorption in plants
  • Promotion of beneficial bacteria, suppression of pathogens
  • Easy integration with fertigation systems and climate control systems
  • PLC Controller for programmable and remote access operation
  • Auto gas shut off if loss of prime feed
  • Low feed gas pressure sensor and alarm
  • Integrated real-time DO monitoring
  • Corrosion resistant stainless-steel frame and components

Specifications

US NEO 60 Hz


Models NEO 150 Standard NEO 250 Standard
Liquid Flow Capacity    
Flow Rate, GPM 150 250
Maximum Liquid Pressure, PSIG 22
Operating Parameters    
Temperature Tolerance, °F 40-140
Solids, inches < 3/8
Gas Feed1    
Maximum Gas Pressure, PSIG 120
Indicated Gas Flow Range, L/min. See FLOW CORRECTION FACTOR TABLE below 0-10 0-14
Electrical Power    
Voltage 460 460
Phase 3 3
Hz 60 60
Total HP 3 5
Total Amp Draw 4.9 8.2
Pump    
Pump Type TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 400v IN to 24 VDC OUT w/OL protection 400v IN to 24 VDC OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor2 Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV
Connections    
Customer Pipe Connection, in 3 4
Inlet (Flanged), in 2.5 3
Discharge (Flanged), in 3 3
Gas Fitting for External O2 1/4" Industrial 1/4" IndustrialD33
Dimensions and Weight    
Height, in 42 42
Width, in 27 27
Length, in 42 42
Weight,lbs 227 282

Note 1: When using oxygen, Moleaer recommends CGA inlet 540, outlet 9/16" - 18RH pressure regulator with delivery range of 5-150 PSI (0.34-10.3 bar).
Note 2: Indicated gas flow range represented under pressure and not represented under standard conditions

* Customer to adapt pipe connection to the unit inlet/discharge. Only use the suggested customer pipe connection

Euro Neo 50hz

Models NEO 150 Standard NEO 250 Standard
Liquid Flow Capacity (water)    
Flow Rate, m3/hr 34 57
Maximum Liquid Pressure, Bar 1.5
Operating Parameters    
Temperature Tolerance, °C 5 - 60
Solids, mm < 9.5
Gas Feed1    
Maximum Gas Pressure, Bar 8.5
Indicated Gas Flow Range, L/min. 0-10 0-14
Electrical Power    
Voltage 400 400
Phase 3 3
Hz 50 50
Total KW 2.2 4
Total Amp Draw 5.5 10.0
Pump    
Pump Model TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 400v IN to 24 VDC OUT w/OL protection 400v IN to 24 VDC OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor2 Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV
Connections    
Customer Pipe Connection 75 90
Inlet (Flanged), mm 75 90
Discharge (Flanged), mm 90 90
Gas Fitting for External O2 1/4" BSPTF 1/4" BSPTF
Dimensions and Weight    
Height, cm 107 107
Width, cm 68 68
Length, cm 107 107
Weight, kg 100 162

US NEO 60 Hz

Models NEO 150 Enriched NEO 250 Enriched
Liquid Flow Capacity    
Flow Rate, GPM 150 250
Maximum Liquid Pressure, PSIG 22
Operating Parameters    
Temperature Tolerance, °F 40-140
Solids, Inches < 3/8
Gas Feed    
Maximum Gas Pressure, PSIG 120
Indicated Gas Flow Range, CFH 0-20 0-30
Electrical Power    
Voltage 460 460
Phase 3 3
Hz 60 60
Total HP 3.4 5.4
Total Amp Draw 5.5 8.8
Pump    
Pump Type TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 230v IN to 24 VDC OUT w/OL protection 230v IN to 24 VDC OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor Optical, 0-50ppm (+/- 1.5ppm) 0-5mv Optical, 0-50ppm (+/- 1.5ppm) 0-5mv
Connections    
Customer pipe connection, in* 3 4
Inlet (Flanged), in 2.5 3
Discharge (Flanged), in 3 3
Dimensions and Weight    
Height, in 42 42
Width, in 27 27
Length, in 42 42
Weight, lbs 283 338

* Customer to adapt pipe connection to the unit inlet/discharge. Only use the suggested customer pipe connection

Euro NEO 50 Hz

Models NEO 150 Enriched NEO 250 Enriched
Liquid Flow Capacity    
Flow Rate, m3/hr 34 57
Maximum Liquid Pressure, Bar 1.5
Operating Parameters    
Temperature Tolerance, °C 5 - 60
Solids, mm < 9.5
Gas Feed    
Maximum Gas Pressure, Bar 8.5
Indicated Gas Flow Range, L/min 0-10 0-14
Electrical Power    
Voltage 400 400
Phase 3 3
Hz 50 50
Total KW 2.5 4.3
Total Amp Draw 6.25 10.75
Pump    
Pump Type TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 400v IN to 24dc OUT w/OL protection 400v IN to 24dc OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mVB44 Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV
Connections    
Customer Pipe Connection , mm* 75 90
Inlet (Flanged), mm 75 90
Discharge (Flanged), mm 90 90
Dimensions and Weight    
Height, cm 107 107
Width, cm 68 68
Length, cm 107 107
Weight, kg 124 187

*Customer to adapt pipe connection to the unit inlet/discharge. Only use the suggested customer pipe connection

US NEO 60 Hz

Models NEO 150 Oxygen Generation NEO 250 Oxygen Generation
Liquid Flow Capacity    
Flow Rate, GPM 150 250
Maximum Liquid Pressure, PSIG 22
Operating Parameters    
Temperature Tolerance, °F 40-140
Solids, Inches < 3/8
Gas Feed    
Maximum Gas Pressure, PSIG 120
Indicated Gas Flow, L/Min. 0-4 0-7
Electrical Power    
Voltage 460 460
Phase 3 3
Hz 60 60
Total HP 4 6
Total Amp Draw 6.5 9.8
Pump    
Pump Type TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Oxygen Generator    
Models Airsep Topaz Ultra Airsep Topaz Ultra
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 230v IN to 24 VDC OUT w/OL protection 230v IN to 24 VDC OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor Optical, 0-50ppm (+/- 1.5ppm) 0-5mv Optical, 0-50ppm (+/- 1.5ppm) 0-5mv
Connections    
Customer Pipe Connection, inches* 3 4
Inlet (Flanged), inches 2.5 3
Discharge (Flanged), inches 3 3
Dimensions and Weight    
Height, in 42 42
Width, in 27 27
Length, in 42 42
Weight,lbs 311 366

* Customer to adapt pipe connection to the unit inlet/discharge. Only use the suggested customer pipe connection

Euro NEO 50 Hz

Models NEO 150 Oxygen Generation NEO 250 Oxygen Generation
Liquid Flow Capacity (water)    
Flow Rate, m3/hr 34 57
Maximum Liquid Pressure, Bar 1.5
Operating Parameters    
Temperature Tolerance, °C 5-60
Solids, mm < 9.5
Gas Feed    
Maximum Gas Pressure, Bar 8.5
Indicated Gas Flow Range, L/Min. 0-4 0-7
Electrical Power    
Voltage 400 400
Phase 3 3
Hz 50 50
Total KW 3 4.8
Total Amp Draw 7.5 12
Pump    
Pump Type TEFC TEFC
Wetted Parts Materials Buna-N/316 SS Buna-N/316 SS
Oxygen Generator    
Models Airsep Topaz Ultra Airsep Topaz Ultra
Controls    
Power (Light) On/Off DP On/Off DP
Motor Starter 400v IN to 24dc OUT w/OL protection 400v IN to 24dc OUT w/OL protection
Start Switch On/Off (24V DC) On/Off (24V DC)
Dissolved Oxygen (DO) Sensor Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mV Optical, 0 - 50 ppm (+/- 1.5 ppm), 0-5 mVC39
Connections    
Customer Pipe Connection, mm* 75 90
Inlet (Flanged), mm 75 90
Discharge (Flanged), mm 90 90
Dimensions and Weight    
Height, cm 107 107
Width, cm 68 68
Length, cm 107 107
Weight, kg 137 198

* Customer to adapt pipe connection to the unit inlet/discharge. Only use the suggested customer pipe connection

Let’s Connect

Contact us today to learn more about how the Neo can improve your operations.




*Required fields