Boost

Advanced Nanobubble Technology for Water & Wastewater

The patent-pending Moleaer Boost is the most effective technology to unlock the full potential of oxygen for water treatment. The Boost produces over 1 billion nanobubbles per mL of water, transferring gas with greater than 85% efficiency. Available in 25 and 50 gallon per minute configurations, the Boost was designed for durable operation, easy installation, and straightforward control.

Boost Image 1
  • Increased total available oxygen content in water
  • >90% standard oxygen transfer efficiency
  • Highest concentration of nanobubbles per mL (>1 billion nanobubbles / mL)
  • Nanobubbles less than 200 nm in diameter
  • 400x the interfacial surface area compared to microbubbles
  • Efficient oxygen transfer at any depth
  • Low turbulence gas diffusion
  • Increases nanobubble longevity in liquid
Models Boost with
Enclosed Impeller Pump
Boost with
Open Impeller Pump
25 Boost 50 Boost 25 Boost 50 Boost
Flow Specifications
Flow Rate, gpm (m3/h) 25 (6) 50 (11) 25 (6) 50 (11)
Minimum Discharge Pressure 13 PSIG 13 PSIG
Maximum Discharge Pressure 22 PSIG 22 PSIG
Operating Parameters
Temperature - PVC Block 41 - 140° F (5 - 60° C) 41 - 140° F (5 - 60° C)
Temperature - SS Block 36 - 210° F (0 - 99° C) 36 - 210° F (0 - 99° C)
Solids Up to 3/8" / 10mm strainer recommended Up to 3/8" / 10mm strainer recommended
Standard Oxygen Transfer Efficiency < 90% < 90%
Gas Feed Specifications
Gas Flow Range 0-5 CFH 0-5 CFH 0-5 CFH 0-5 CFH
Optimum Pressure 120 PSI 120 PSI
Air Quality ISO 8573 - 1:2010 Class 1.4.1 ISO 8573 - 1:2010 Class 1.4.1
Pump & Electrical
Pump Model Goulds, NPE, TEFC Goulds, NPE, TEFC
Wetted Parts Buna/Stainless Steel/Viton Buna/Stainless Steel/Viton
Pump Voltage 115/230 V 115/230 V
Pump Motor HP (KW) 0.75 (0.57) 2 (1.48) 1.5 (1.12) 2 (1.48)
Starter Onboard NEMA 4X Onboard NEMA 4X
Connections
Inlet: Inch 1.25 FNPT 2.0 FNPT 1.25 FNPT 2.0 FNPT
Discharge: Inch 1 FNPT 1.5 FNPT 1 FNPT 1.5 FNPT
Air ¼" Industrial ¼" Industrial
Dimensions & Weight
Height, Inches (cm) 29 (73.6) 29 (73.6)
Width, Inches (cm) 21 (53.3) 21 (53.3)
Depth, Inches (cm) 14 (35.5) 14 (35.5)
Shipping Weight Estimate, lbs (kg) 80 (36) 80 (36)
  1. Oil, water, and particulate must be removed from all gases before entering the generator
  2. Goulds NPE Pump, Specified wetted parts optional
  3. Connections can be flanged or sanitary upon request
  4. Standard PVC Body, with standard Centrifugal pump
View Datasheet